EINAR ® POLYMER ADDITIVES Einar ® 601 for anti-stat applications The use of efficient anti-stats in PVC is important in a range of different applications as both plasticized and rigid PVC will need anti-stat protection for various uses. Einar ® 601 offers excellent anti-stat protection in PVC where it has the right migratory profile to build anti-stat protection on the polymer surface. It has shown very good results in both rigid PVC as well as in combination with plasticizers. Recommended loading levels are 0.5 - 1.0% for most applica- tions and may be higher in certain highly plasticized formula- tions. Einar ® 601 product details Physical/chemical properties: Storage conditions: Packaging: Product form: Total shelf-life: polyglycerol ester free fatty acids, max. 3% saponification value 165-180 mgKOH/g colour off-white form at 25°C paste Should be stored in a cool and dry place in tightly closed packaging 180 kg/396.8 lb net in steel drum Einar ® 601 comes in paste form Min. 24 months Einar ® 211 for anti-fog applications Einar ® 211 is an excellent performer for PVC cling film and works particularly well in cling film applications where the objective is to obtain a good and reliable performance in either a cold fog or a hot fog application. Einar ® 211 is a fast acting anti-fog and will produce clear and transparent film for an extended period of time. The recommended loading level of Einar ® 211 is 0.5 - 1.0% for cold fog applications and for hot fog the recommended loading level is 0.3 - 0.6%. Einar ® 211 product details Physical/chemical properties: Storage conditions: Packaging: Product form: Total shelf-life: monoglycerides, min. 90% free fatty acids, max. 1.5% free glycerol max. 1% colour off-white form at 25°C paste Should be stored in a cool and dry place in tightly closed packaging 180 kg steel drum Einar ® 211 comes in paste form Min. 12 months Guidelines for use Einar ® 601 and Einar ® 211 can be easily incorporated into a PVC compound and can be mixed well with other liquid products in a plastisized PVC formulation. Einar ® processing aids and mould release agents Einar ® 201 and Einar ® 303 will offer good lubrication proper- ties for a range of different extrusion applications and they are primarily internal lubricants. Typical loading levels are 0.3 - 1.0%. Einar ® 201 is also a very good mould release for many PVC injection moulding applications and is typically used at loading levels of 0.3 - 0.6%. Both products contain glycerol monostearate made from vege- table oils and are available in pellets and in powder form, with 24 months of shelf-life. The products can be supplied in 20 kg pa- per bags with a PE inner bag or in 500 kg anti-static PE bigbags. Guidelines for use Einar ® 201 and Einar ® 303 can be incorporated into the PVC compound or by direct addition of the neat additive to the injection moulding or extrusion process of plastic articles and packaging.
Download PDF fil