Einar® additive solutions for PVC Einar® 601 for anti-stat applications Einar® processing aids and mould release agents The use of efficient anti-stats in PVC is important in a range of different applications as both plasticized and rigid PVC will need anti-stat protection for various uses. Einar® 601 offers excellent anti-stat protection in PVC where it has the right migratory profile to build anti-stat protection on the polymer surface. It has shown very good results in both rigid PVC as well as in combination with plasticizers. Recommended loading levels are 0.5 - 1.0% for most applications and may be higher in certain highly plasticized formulations. Einar® 201 and Einar® 303 will offer good lubrication properties for a range of different extrusion applications and they are primarily internal lubricants. Typical loading levels are 0.3 - 1.0%. Einar® 201 is a very good mould release for many PVC injection moulding applications and is typically used at loading levels of 0.3 - 0.6% Your direct benefits: Einar® 1103 for anti-stat coatings Einar® 1103 is a water-based anti-stat coating solution. Uniquely efficient, it will work at coating concentrations down to 10 mg/m2 and with a coating thickness of 10 nm. It can be applied to PVC by either roll or spray coating and will leave only a thin, invisible layer of additive coating. Einar® 211 for anti-fog applications Einar® 211 is an excellent performer for PVC film and works particularly well in cling film applications where the objective is to obtain a good and reliable performance in either a cold fog or a hot fog application. Einar® 211 is a fast acting anti-fog and will produce clear and transparent film for an extended period of time. The recommended loading level of Einar® 211 is 0.5 - 1.0% for cold fog applications and for hot fog the recommended loading level is 0.3 - 0.6%. • Einar® 601 – Highly efficient anti-stat protection • Einar® 211 – Very good anti-fog performance in PVC cling film • Einar® 201 – Lubrication and mould release properties • Worldwide approved for food contact • Consultancy and technical evaluations available from our technical team Other offerings from the Einar® range: • Einar® 601 for anti-static in PE applications • Einar® 618 and Einar® 422 for anti-fogging in PP applications • Einar® 611 and Einar® 614 for anti-fogging in PE applications Contact us and let us help you develop and test the optimum additive solutions for your PVC applications. Find out more at polymers.palsgaard.com Palsgaard A/S DK-7130 Juelsminde, Denmark Phone +45 76 82 76 82 direct@palsgaard.dk
Download PDF fil